Z-POXY 30 MINUTE 2 PART EPOXY

• 30 Minute set time
• Clear formula
• Tough, Permanent, Bond
• Shock and Vibration resistant
• Excellent gap filler
• Filler Compatible

USES:  30 MINUTE Z-POXY is a premium high strength two part epoxy adhesive. The 30 minute cure time allows a greater working time and increased pot life. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. Use it on all fire wall and engine mount installations, its perfect for attaching bulkheads and formers in epoxy glass fuselages and boat hulls. It does not get brittle with age and it’s easy to mix, just combine equal parts by volume. Handy to have at home for all types of fix-it jobs, great to have in the shop for all types of wood working and furniture repair.

HOBBY:  Zap 30 Minute Z-Poxy is the strongest bonding strength you will find.  All serious modelers use Zap 30 Minute Z-Poxy.  This product is great for joints, fillets, reinforcement, fuel proofing and much more!  FOAM SAFE:  Due to the long set time, this product does not create a lot of heat and will not melt foam.

OUTDOOR: When extreme strength is needed to lock down fishing equipment, lures, flies, and archery equipment, reach for Z-Poxy.  This product will not whiten underwater or breakdown over time.

WOODWORKING:  It does not matter if you are professional or a hobby woodworker, Zap’s 2 part epoxy is the best epoxy on the market.  Use the 30 minute epoxy for filling knot holes, locking down loose chairs and making extra strong joints.  Consider using Z-Poxy for bonding hinges and anchors into your wood project.  By adding in a very small amount of powdered colorant, you can make holes and cracks disappear.  

HELPFUL HINT: Zap Z-Poxy requires a 1:1 mixture by volume.  Watch the volume on the bottles by looking at the open area between the label on the bottles, and simply make sure that they line up.  When mixing the 2 parts, use a figure 8 to keep the bubbles at a minimum so if you pour out the mixture, you will have minimal air pockets in your E-Poxy.